Monitor Mount Speaker Perch

I didn't have enough space on my desk for a two monitor setup as well as my Audioengine A5+s. I tried lots of ways to have them there but It didn't look good or the speakers would get covered by the monitors. Then I had the idea of attaching them to my monitor arms.

You need to use a 1/2" bolt to attach the perch to the speaker and it slides over any Monitor Stand that is 48mm in diameter. Can be easily modified to accommodate different mounts. The platform is 100x100mm and you could use double sided tape instead of hardware if your speaker doesn't have a mount on the bottom. The mounts can spin on the Monitor Stand so you can angle them inward if you need. This puts the speakers right at ear height.

Here is the monitor mount(s) I use: http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575558676&toolid=10001&campid=5338634599&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FNew-Single-Arm-Monitor-Desk-Mount-Computer-TV-Screen-Bracket-Stand-27-QA3S-MY%2F254359941539%3F\_trkparms%3Daid%253D111001%2526algo%253DREC.SEED%2526ao%253D1%2526asc%253D20160908105057%2526meid%253D691ba8affb334affa67015c82737e8c2%2526pid%253D100675%2526rk%253D2%2526rkt%253D15%2526sd%253D193240004585%2526itm%253D254359941539%2526pmt%253D1%2526noa%253D1%2526pg%253D2380057%26\_trksid%3Dp2380057.c100675.m4236%26\_trkparms%3Dpageci%253Af359c246-1d26-11ea-a5e6-74dbd1804b42%257Cparentrq%253Afc075e2a16e0a12931171514ffbcc3c8%257Ciid%253A1

Enjoy and post your makes!

If you found my Things useful, treat me to a cup of coffee by using the PayPal button below :) Buy me a cup of coffeeBuy me a cup of coffee $3.00 USDBuy me a massive cup of coffee $5.00 USDGive me a caffeine coma $10.00 USD Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

15%

Filament: 3DSolutech PLA Transparent
Notes:

190-200 nozzle
50-60 bed
45-50mm/s speed
12 line brim
5 walls
5 bottom layers
3 top layers