Kindle Paperwhite 4 (10th Gen) TPU Case QI Charging

I made a TPU case for my wife's kindle featuring QI/wireless charging
0
42
0
342
aktualisiert 3. September 2024

Beschreibung

PDF

Deutsch:

Für das Kindle Paperwhite der 10.Generation, welches meine Frau von mir bekommen hat, habe ich - genauso wie für meines der 11. Generation - ein Case entworfen, das das Kindle nicht nur schützt, sondern dieses auch günstig, schnell und einfach mit einer kabellosen Ladefunktion ausstattet.

Für mein Kindle der 11. Generation habe ich kürzlich ein passendes Dock entworfen, damit das Kindle schnell und einfach geladen werden kann (https://www.printables.com/de/model/959877-kindle-paperwhite-qi-charging-case-dock-11gen). Natürlich funktionieren aber fast alle gängigen kabellosen Ladegeräte (QI-charging-pads). Wer dennoch das von mir entworfene nutzen möchte oder bereits gedruckt hat, kann dieses auch für den Kindle der 10. Generation nutzen, indem er den Kindle samt diesem Case am rechten Rand der Ladestations ausrichtet.

Um das Laden zu vereinfachen und schnell die richtige Position auf dem Ladegerät zu finden, habe ich auf der Rückseite ein kleines Symbol eingestanzt, das genau über der Mitte des Lade-Empfängers platziert wurde. Da der Micro-USB Port des Kindle nicht wie bei der 11. Generation mittig sitzt, sitzt auch das Ladepad etwas seitlich.

Was ihr benötigt:

Druckanweisungen:

  • Druckt das Case auf dem Rücken liegend mit Supports zur Druckplatte (es reichen schon wenige Supports an den Ausschnitten der Anschlüsse)
  • Druckt das Case unbedingt in TPU oder einem ähnlich flexiblen Material, ansonsten bekommt ihr das Kindle nicht hinein!

“Montage”:

  • Steckt den QI-Empfänger am Kindle an und klappt ihn an den Rücken des Kindle
  • Steckt zuerst die Unterseite des Kindles ins Case und helft ein bisschen nach, damit der QI-Empfänger richtig in der Aussparung sitzt
  • Drückt anschließend die Oberseite des Kindles ins Case

Wenn euch das Modell gefällt, lasst mir gern ein Like, Bewertung oder Make da. Ich freue mich auf eure Makes :)

PS: Aktuell arbeite ich an einer neuen Version für das Kindle Paperwhite der 11. Generation, da mein altes Case (https://www.printables.com/de/model/775091-various-kindle-paperwhite-11-cases-blank-qi-chargi) verglichen mit diesem hier mittlerweile etwas klobig erscheint. Gerade läuft der erste Testdruck, wenn alles sitzt, lade ich in kürze hier alles hoch

PPS: Hier ist es → https://www.printables.com/de/model/995169-kindle-paperwhite-5-11th-gen-tpu-case-qi-charging

 

 

English:

For the Kindle Paperwhite 10th Generation, which my wife received from me, I have designed a case - just like for my own 11th Generation Kindle - that not only protects the Kindle but also equips it with a wireless charging function in an affordable, quick, and easy way.

For my 11th Generation Kindle, I recently designed a matching dock so that the Kindle can be charged quickly and easily (https://www.printables.com/de/model/959877-kindle-paperwhite-qi-charging-case-dock-11gen). Of course, almost all common wireless chargers (QI charging pads) work. However, if you want to use the one I designed or have already printed it, you can also use it for the 10th Generation Kindle by aligning the Kindle with this case on the right edge of the charging station.

To simplify charging and quickly find the right position on the charger, I have engraved a small symbol on the back, placed exactly over the center of the charging receiver. Since the Micro-USB port of the Kindle is not centered like in the 11th Generation, the charging pad is also slightly off-center.

What you need:

Printing instructions:

  • Print the case lying on its back with supports to the print bed (just a few supports at the cutouts for the ports are enough).
  • Be sure to print the case in TPU or a similarly flexible material; otherwise, you won’t be able to fit the Kindle inside!

“Assembly”:

  • Plug the QI receiver into the Kindle and fold it onto the back of the Kindle.
  • First, insert the bottom of the Kindle into the case and gently push it so that the QI receiver sits correctly in the recess.
  • Then, press the top of the Kindle into the case.

If you like the model, feel free to leave me a like, review, or make. I’m looking forward to your makes :)

P.S.: I am currently working on a new version for the Kindle Paperwhite 11th Generation, as my old case (https://www.printables.com/de/model/775091-various-kindle-paperwhite-11-cases-blank-qi-chargi) now seems a bit bulky compared to this one. The first test print is currently running, and if everything fits, I’ll upload everything here soon.

PPS: Here it is → https://www.printables.com/de/model/995169-kindle-paperwhite-5-11th-gen-tpu-case-qi-charging

 

Tags



Herkunft des Modells

Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet.

Lizenz