Digits and support for TROMMA Ikea Clock

Digits and support for TROMMA Ikea Clock

I used black PETG for the digits and white PETG for the support.
Split the digits in multiple objects and arrange them to the build plate.
For the third clock I printed all at once, starting with white PETG and changing to black at 3.6mm height.

I printed them with 0,2mm layer height, 3 perimeters, 5 layers top and 4 layers bottom, 15% infill.

One M3 x 16mm screw and one M3 nut is required for the support.
30pcs screws 2,9x4,5 (ex. 5001390 BOSSARD) are required for the digits.

Print Settings

Printer: MaxMicron and also PRUSA MK3S+

Rafts: No

Supports: No

Resolution: 200

Infill: 15

Filament: Generic PETG Black and White

Category: DIY