This is a basic model to repair an Ikea SKURUP work lamp. It works by clamping the rods in the 3D printed halves, and then with a 3D printed screws and the profile on the inside, the angle of the joint is easily adjustable.
I printed everything with 6 outside perimeters for strength, and 1.5 mm layer height for smooth screw and nut interaction.
Read more about this project here:
https://olivier.berlin/ikea-lamp-repair/
To complete this build, you need 8 x M4x4 threaded inserts for 3D printing, and 8 x M4x14mm screws. They are used to clamp the tubes in the 3D printed halves.
Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet.