very nice mod.
![](https://media.printables.com/media/comment_images/6f/12ff9a-d19b-47b4-b8d0-ee99cef81563/thumbs/outside/320x240/jpeg/img_7863.webp)
![](https://media.printables.com/media/comment_images/86/28bed1-7419-4d8a-a26d-0c9e0cf36750/thumbs/outside/320x240/jpeg/img_7859.webp)
Still need to mount it, but it worked perfectly! Instructions were easy to follow and crimping my own cable was much easier than I expected. Thanks!!
Brilliant little make - bought a metal vice to help make the cables which worked a treat. I bought 1m of the 24 channel cable and cut it into 30cm and 70cm AFTER having fitted just the 2 red connectors on the ends to test them first!
Took me a while to source the Micro-Match connectors, but now everything is in place and working, thanks for the nice design and thumbs up for the comprehensive installation guide!
Easy to follow instructions! Adds really nice flexibility when removing the printer for maintenance.
Love this mod it has made removing my printer for maintenance so much easier when combined with the power supply quick disconnect
Thanks a lot for sharing this model! It works perfectly, finally an easy way to remove the printer from the enclosure without fearing to damage the connector on the LCD when unplugging it for the n-th time ...
Used some different connectors which have a bit thicker flanges so I had to use M18 screws instead of M16. Also used button head screws to give the connectors the space to seat fully.
Printed in Prusament PETG Jet Black.