Sovol SV07 - Webcam holder for Microsoft LiveCam 3000 HD

A bracket which mounts a Microsoft LiveCam 3000 HD to the base of the Sovol SV07.
12
137
0
1016
aktualisiert 15. August 2023

Beschreibung

PDF

This bracket mounts a Microsoft LiveCam 3000 HD webcam to the base of a Sovol SV07. It uses existing screw holes and screws. Except for the webcam and some cable-ties, no additional materials are needed.

Printing

  1. print laying on its side (the biggest, nearly triangular surface)

 

Installation

  1. Mount the webcam to the bracket
    1. Stick a piece of masking tape / paper tape to the underside of the small arm that holdes the webcam. This will increase the friction between the webcam and the holder, preventing the webcam from swivveling too freely.
    2. Follow the instructions in this article to open the webcam and exchange the existing flexible holder for the 3d printed one.
  2. Mount the bracket to the printer
    1. Remove the two screws which fix the black plastic-holder for the touchscreen to the base, add the bracket and fix it with the screws.
  3. Use cable ties to fix the cable to the small slots provided in the bracket.

 

In case you have not yet created the proper software setup for running a webcam on the SV07: How to use external camera on SV07.

Tags



Herkunft des Modells

Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet.

Lizenz