MiSTer FPGA Retro Computer Case

This case is based on the AjSTer a Mister case for A-JAZZ AK33 keyboard by Yurif74.…
26
105
0
2499
aktualisiert 27. September 2022

Beschreibung

PDF

This case is based on the AjSTer a Mister case for A-JAZZ AK33 keyboard by Yurif74. https://www.thingiverse.com/thing:4721208

I designed the case so that all the main cables can be plugged into the back of the case, with the majority of usb ports located on the right hand side for easy access.

I also added a switch on the side to turn it on. For this to work I had to solder wires onto the de10 nano and connect them from an external DC Panel Socket located in the back of the case, via the switch. This switch also powers the mister usb board. Note that the de10 nano power socket is blocked by the case.

Parts used (see image)

-Ajazz AK33 Mechanical Gaming Keyboard Usb White/Black switches

-DC Socket Panel Mount Jack Plug 5.5mm x 2.1mm

-Adafruit Panel Mount Ethernet Extension Cable

-Ultra Mini Rocker Switch - SPST - Width : 6.5mm - Height : 19.0mm

-USB 3.0 Male To Female Extension Cable With Screw Panel Mount Holes

-LEDs 3mm

-All screws used are M3 (3mm)

Mister and IO board: 2 x M3 - 20mm, 2 x M3 - 4mm

USB board: 4 x M3 - 4mm

SSD: 4 x M3* 4mm

SSD brackets: 4 x M3 - 12mm

LED board: 2 x M3 - 4mm

Case top: 4 x M3 - 8mm, 2 x M3 - 20mm

Category: Electronics

Tags



Herkunft des Modells

Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet. Importiertes Modell von Thingiverse.

Lizenz