OMNISTOR 5500 Endcap left & right

These Endcaps are no longer available as official spare parts. Simple print it with PETG without any supports.
3h 9m
2× Druckdateien
0.15 mm
0.40 mm
29.00 g
8
106
0
997
aktualisiert 19. Juni 2022

Druckdateien

OMNISTOR5500-Endcap-right_0.15mm_PETG_MK3S_1h35m.gcode
OMNISTOR5500-Endcap-right_0.15mm_PETG_MK3S_1h35m.gcode
0.40
0.15 mm
1.58 Std.
14g
Prusa MK3/S/S+
3 MB  |  24. Juni 2022
OMNISTOR5500-Endcap-left_0.15mm_PETG_MK3S_1h33m.gcode
OMNISTOR5500-Endcap-left_0.15mm_PETG_MK3S_1h33m.gcode
0.40
0.15 mm
1.57 Std.
14g
Prusa MK3/S/S+
3 MB  |  24. Juni 2022

Modelldateien

OMNISTOR5500-Endcap-down-right.stl
OMNISTOR5500-Endcap-down-right.stl
140 kB  |  24. Juni 2022
OMNISTOR5500-Endcap-down-left.stl
OMNISTOR5500-Endcap-down-left.stl
161 kB  |  24. Juni 2022
OMNISTOR5500-Endcap-top-right.stl
OMNISTOR5500-Endcap-top-right.stl
948 kB  |  24. Juni 2022
OMNISTOR5500-Endcap-top-left.stl
OMNISTOR5500-Endcap-top-left.stl
962 kB  |  24. Juni 2022

Herkunft des Modells

Der Autor hat die Herkunft des Modells noch nicht angegeben.

Lizenz