This is a file to make it easier to interpret the X-axis and Y-axis calibrations
Este archivo es para hacer más sencilla la interpretación de los desfases del eje X y el eje Y
Print this file with the first extruder ---- Offset_X_Y_dual_extruder_1. stl
Print this file with the second extruder ---- Offset_X_Y_dual_extruder_2. stl
Value scale
In this image you can see the value of each line (0.1*value)
En la siguiente imagen se puede ver la escala de valores (0.1* valor)
Example 1
In the first example extruder 2 is perfectly aligned with extruder 1 in the X and Y axis
En el primer ejemplo el extrusor 2 está perfectamente alineado con el extrusor 1 tanto en el eje X como en el eje Y
Example 2
In the second example extruder 2 is offset -0.3mm in X and -0.2mm in Y
En el segundo ejemplo el extrusor 2 está desviado -0.3mm en el eje X y -0.2mm en el eje Y
Example 3
In the third example extruder 2 is offset 0.6 mm in X and -0.2mm in Y
En el tercer ejemplo el extrusor 2 está desfasado 0.6 mm en el eje X y -0.2 mm en el eje Y
Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet.