BLV Mgn Cube - CC-Carriage - Titan Aero Mount - MGN12 Linear Rails - HotEnd - BLV - Extruder

So ... As promised a few weeks ago, here comes my own version of a hotend for the Titan Aero.

See it in Action:

In Action: https://www.youtube.com/watch?v=Xlx7dZzM6mo

The goal was to save weight and above all to save in width, because the old hotend has cost quite a lot of travel. Now it is only a few mm-cm.

Also, I have simplified the printing. The whole construct consists of 3 main parts.

Who uses a filament monitor can simply print out the adapter (Mount).
This also fulfills another purpose: The assembly of a Bowden coupling is possible.

The IR sensor is also modular and does not need to be used.
But if you use it, then it is even height adjustable.

The Belts are clamped and not screwed, which saves weight.

If you make this thing ... Post the make on thingiverse ... That's my reward

If you have questions or suggestions for improvement, let me know.
3D-Animation:https://a360.co/2ZRry1A

Shopping-List
Optcal Sensoren for Endstop: https://www.amazon.de/gp/product/B077X8XL56/ref=as\_li\_ss\_tl?ie=UTF8&psc=1&linkCode=sl1&tag=crazyc-21&linkId=414d8d7f227714280828c35d6b1991ff&language=de\_DE
CableChain: https://www.ebay.de/itm/1M-Hochwertige-Nylon-Energiekette-Schleppkette-Drahtträger-Kabelschlepp/382815415645?ssPageName=STRK%3AMEBIDX%3AIT&var=651585754745&\_trksid=p2057872.m2749.l2649

Updates

2019/11/14 Added a new AirDuct or alternative Version
2019/10/31 Added CableChain Holder on Frame Side
2019/10/24 Added Shopping List
2019/10/20 Added BLTouch Mount
2019/10/19 Cleaning all stl-files again

Print Settings

Printer:

BLV

Rafts:

No

Yes

Resolution:

0.2

60-80%

Filament: Goedis ABS, PETG, PLA Black, Blue