This is a pretty nice rotating rings toy which is perfect to use as a fidget toy in almost every situation.
4h 21m
1× tiskový soubor
0.15 mm
0.40 mm
27.00 g
18 918
129 k
2 716
334 k
aktualizováno 31. ledna 2024

Výtisky

Komentáře

0.2mm 10% infill Sovol PLA. Works fabulously, instantly entranced my partner's ADHD, 10/10 no notes. (upraveno)

A great little fidget spinner!

Nice design! It spins pretty well right off the printer.

Very nice! Printed in orange and grey PLA on a textured build plate.

Also printed the loose tolerances one at 66% scale to make a children's pocket sized fidget

Had to use the loose tolerance. With a little persuasion it came out great!

Love this print! Only 23 grams were used with 5% infill! Put well and moves freely!

Perfect no issue
Printer: Ender3 Eternity
Print time: 50min
Modell: Rotating-ring-toy.stl
Slicer: Orca slicer
Profile: default 0.16mm
Filament: Prusament PLA