Tatra 813 8x8 KOLOS

Don’t print it smaller than it is. (it will destroy the textures)

You can print it from white material and paint it.

You should glue the parts of the car together.

All you will need: glue, sand paper, 3D printed parts.

File: Tatra 813 8x8 KOLOS .3mf -  everything is set

File: KORBA .3mf - Be careful, you can get a twisted corners. (Use Brim)

File: OSY 3mf - everything is set

File: KOLA 3mf - You can print it from flex materials (on the picture). (Use Brim)