Kürnikotvör - self-opening chicken coop door

Pedal-controlled coop door that saves 50% of the doorkeeper's time. With this door, you don't have to get up early.
37
78
1
1935
aktualizováno 6. ledna 2023

Popis

PDF

How does it work:
https://cdn.blog.prusa3d.com/wp-content/uploads/2022/12/VID-20220629-WA0000.gif

The door frame is approx. 400x400mm. Cutting it in PrusaSlicer may be necessary (depending on your printer type).

The pulley wheel should be printed in 3 copies, cutting it in half may save some time and support material.

The cut 3D-printed parts are meant to be glued together, then screwed to the plexiglass and chicken coop. The best way is to insert the plexiglass into the frame, then predrill the holes.

Required plexiglass dimensions: 2x315x385 mm

All holes are for M3 screws and nuts.

Štítky



Původ modelu

Uživatel se označil za původního autora tohoto modelu.

Licence