pegboard style tool system
my main goal was to have my own system thats free of hardware - no supports - snap clip affair with expandability for the future to install all types of holders - i mainly wanted to make sure the pegs were actually useable, reusable, minimal failures and the least amount of filament required hence why i am primarily using petg for this project due to its durability and decent oil resistance
ACTUAL MAIN BOARD IS 170X190MM
feel free to add to this project, i am gonna be working on this weekly and resizing to fill my drawers. i can see this becoming many types of holders similar to the matco style system but most importantly are the dimensions of the pegboard which has a high resolution of holes - every 10mm
this can be used for all types of drawer organization but is currently for sockets only
i do plan on making this more parametric with keys for the boards to lock together
print the pegboard with zero infill, 1 wall, 2 bottom layers, 4 top layers with .22-.2 height and im able to get these down to 56 grams per board
Updates
5.26.22
-v4 pins with a tighter fit
7.9.24
in progress
multiple types of low width boards to take up space - 20mm 40mm 60mm 80mm 100mm needed for both wide and short sides
open style pin for 3/8 and 1/2 to reduce filament - leave both options
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15%
Filament brand:
overture
Filament color:
blk
Filament material:
petg
Notes:
the snap clips may not work in PLA unless you print them sideways. im ok with petg to print upright top down
1 wall, 2 top layer, 2 bottom layer
no supports
print as they drop into the slicer
use more top layers if you want the underside of the pegboard to be smooth if you do petg. or just leave it 2 layers if you dont mind
use at least 3 walls on the pins to make sure the clips are solid
Uživatel se označil za původního autora tohoto modelu.